The backyard of any house should look beautiful and offer you peace of mind. If you add a water garden to the landscape, then it enhances the aesthetic value. The beautiful sights and sounds of the water will have a soothing effect on you. Here are some tips to install backyard fountain and water features in Mansfield.

Planning the water garden


You have to prepare for the backyard water garden very carefully. Select an exquisite location that is close to a power socket. Do not select a spot that lies right under the tree. The fountain spot needs to receive a good amount of sunlight. 
If you plan accordingly, it would make it easy for you to maintain it later. The spot should not be on an inclined plane. Select a flat area so that the water remains stable for longer periods. Make rough drawings and choose a design that will balance space and time constraints. Smaller gardens take little space, while larger ones sustain themselves for longer periods.



Digging the hole


A variety of plants can flourish with this style of garden, according to the water features Mansfield garden experts. Instead of round bowl shape, you can go for more level designs. You have to dig a hole that is 1 foot deep and 1 foot wide. In this shelf area, you can place shallow water plants. Deeper shelves will suffice for taller bog plants. But you need to ensure that there are no power or plumbing lines near the hole you are digging.

Adding a liner


Select a preformed or flexible liner and place it in the pond. You can choose from PVC plastic, rubber or fiberglass liners. Plastic ones last for 15 years, while rubber liners offer more than 30 years of service. Fiberglass liners are a little more expensive, but they have a very long life, even in extreme conditions.

Place the liner considering the water garden's outline and trim off the excess material using a pair of scissors. A well-designed rock or stone garden around the edges will hide this liner. Make accurate measurements of the liner size and unfold the liner in the hole.

Installing the water pump


The plants and fish inside the pond enjoy circulating water. You have to install a submersible water pump to achieve this goal. Select a suitably sized pump and place it in the center of the garden. You can also install a second pump for smoother movement of the water. Place the pump in an elevated position on top of a brick or stone shelf. Afterward, you have to install the filtration system on to the pump. You can also use a steel mesh to cover and protect the pump.

It is ideal to cover half of the water garden with a variety of plants. You can place lotuses, water lilies, and hyacinths along with marginal and submerged plants. Marigolds and floaters will add beauty to the backyard, according to Water features Arlington gardeners. An adequate amount of oxygenator plants will keep algae away. Add fishes to keep away the mosquitoes, flies, and other types of insects and worms. You can opt for goldfish, carp, and snails. Finally, make sure to clean the filter regularly for a healthy and eye-catchy water garden.